Results: 1 - 12 (of 30)  |  Show all
  • 110db twin tone siren alarm padlock.

    There is a deep groove on the inside edge on one side of the shackle, when fitted with the groove on the key port side of the lock the alarm is active. If shackle is fitted other way round the alarm system is inactive. The alarm will sound for ten seconds if activated and will reset after thirty five seconds without a trigger.

    Supplied with keys and size LR44 button cell batteries.

  • The SPS260R solar-powered siren is a totally wireless siren, designed to help protect yards, driveways, gardens and all types of other external locations. The Strobe Siren is battery powered and charged by the built-in Solar Panel (or optional 12V DC power).

    The signal transmission is all by wireless radio frequency which achieves significantly wirefree transmission and enhances the flexibility to install. The strobe outdoor siren can be used as a wireless siren by connecting to the control panel as well as a standalone alarm system to work with other wireless accessories.

    Useful info:

    • Powered by a Solar Panel, no mains power neededCNC alloy fork
    • Compatible with any miGuard alarm panels and sensors
    • Easy to install, no wiring needed
    • Weatherproof and stylish design (IP55)
    • LED Strobe Indicator for Intruder deterrent
    • Built-in 1pc of 3.7V/1200mAh lithium battery enable 10-day standby
    • Fully tamper protection
    • Piercing 115dB siren with selectable duration (30sec./3min./5min.)
    • Volume adjustable (High/Low/Mute)

    WHAT'S IN THE BOX: Wireless Siren x 1 3.7V Rechargeable lithium battery x 1 Fixing packs Installation and Operating Instructions.

  • The P900 is a high performance wireless PIR movement sensor. It consists of a digital dual-core fuzzy logic infrared control chip and intelligent analysis which effectively identifies interference signals from body movement signals and reduces false alarm rate. With automatic temperature compensation and anti-air turbulence technology, it easily adapts to environmental changes. The detector also has the advantages of energy saving, reliability and easy installation.

    WHAT'S IN THE BOX: Passive Infra-Red PIR Detector x 1 Bracket x 1 Fixing Screw Pack AA 1.5V LR6 battery x 2 Installation and Operating Instructions.

    Useful info:

    • Detection coverage: 8m/110°
    • Temperature compensation control
    • Anti-Air turbulence technology
    • Walk test mode
    • Battery powered
    • Energy Saving
    • Low power LED indication
    • Low battery notification (available only when connected to G5 / G3 GSM panel)
    • Tamper protection
    • Internal antenna
    • Compatible with any miGuard alarm system (A8, A9, A11, G3, G5)
    • Transmit distance: 80m (open area)

  • Upgrade your home security with the miGuard A11wireless alarm system, including instant messages to up to 6 phones if you suffer a break-in.

    There's no need to rely on the neighbours responding to your alarm going off when you can phone the police yourself – or have a security firm automatically informed to ensure a super-fast response.

    You can also control the alarm system via an app on your smartphone, including checking the alarm is on while you're out of the house – and activating it (or deactivating it) if necessary. There's even an option to leave messages when the next person arrives home!

    When an alarm condition occurs, a recordable 10 second voice memo and alarm voice message will be played. A Duress code can be used, which will enable the alarm to send out an activation notification silently. A wirefree external solar siren can easily be added for additional protection.

    The control panel has a touch keypad and LCD display with a guide menu for easy programming.

    The panel can be disarmed using the RFID tags, and unlock an electronic door lock. The PSTN panel can store 6 phone numbers and 2 ADEMCO CID CMS numbers.

    Useful info:

    • Touch keypad with LCD display
    • Stores 6 alarm phone numbers plus 2 central monitoring station numbers
    • Remote arm/disarm
    • Supports up to 50 wireless sensors, 10 remotes, 50 RFID tags
    • Listen-in feature with 2 way talk & monitoring
    • Voice memo feature
    • Internal Siren Volume: Off, Low, High
    • Tamper protection
    • miGuard A11 communicating wireless alarm system
  • Secure your valuables and important documents with the Yale Digital Safe.

    This tough 35 cm safe is ideal for keeping your most precious items like jewellery, keys, cash, passports and personal information, giving you total peace of mind.

    This Yale safe features an easy-to-operate keyboard and LCD display, just type in your code to open it. If you forget your code there are 2 manual override keys so you can always get access to your precious belongings.

    For extra convenience it comes with a fixing so you can attach the safe to the wall or the floor.

    Useful info:

    • Yale Digital Safe
    • 35 cm safe
    • Easy to operate
    • Programmable digital keypad
    • LCD display
    • Can be mounted to wall or floor
    • Fixing included
    • Comes with 2 manual override keys
    • Includes 4 x AA batteries
    • Dimensions: H 27, W 37, D 29 cm

  • Wireless battery operated PIR alarm.

    Wireless PIR alarm that is ideal for home, shed, garage etc. Simple to install and includes wall mountable motion detector (requires 4 x AA batteries) with a 6 metre detection range and 105db audible alarm. Supplied with two remote control key fobs and 3 x LR44 batteries.

  • The Yale Easy Fit Telecommunicating Alarm calls you when it’s triggered, giving you complete peace of mind no matter where you are.

    This simple-to-install DIY home alarm system harnesses pre-programmed wire-free technology so it doesn’t require complex installation.

    It can store up to 3 telephone numbers, such as your home, mobile and work numbers and will call them in a specified sequence if it's activated. It can be turned on and off using a touchtone phone for added convenience.

    This alarm features intuitive touch screen controls, movement detectors and door contact sensors. The system can be expanded to include up to 30 different sensors including the Yale Easy Fit Door and Window Contact (see item number 493TW) and Motion Sensor (493TY) to make your property even more secure.

    Useful info:

    • Yale Easy Fit Telecommunicating Alarm
    • Includes Siren Box Dummy and siren
    • Comes with 2 PIR movement detectors
    • Includes 2 door contact sensors
    • Touch screen control panel
    • 2-year guarantee
    • Expandable to include up to 30 devices

  • Solar powered dummy CCTV camera.

    Solar panel with 2-piece Ni-Mh rechargeable 12-volt 500mah batteries, with flashing red light. Solar and battery power allows usage during day and night. Immitation LED's and wire give a realistic look when positioned. Suitable for indoor or outdoor use. Wall mountable with 360° rotating base, supplied with screws and wall plugs.

  • The Yale Easy Fit Standard Alarm Kit is the simple way to secure your home and get peace of mind.

    Ready to install straight from the box, this DIY alarm system is designed to be easy to fit without any complex wiring.

    Perfect for a flat, terraced or semi-detached home, just activate and deactivate the alarm by entering your pin code on the keypad. The system is pre-set with a 20 second exit/entry period.

    It can be expanded with more Yale alarm accessories including the Yale Easy Fit Door and Window Contact (see item number 493TW) and Yale Easy Fit Keyfob (493TV).

    Useful info:

    • Yale Easy Fit Standard Alarm Kit
    • Wireless and easy to install
    • Can be expanded with additional sensors
    • Activate or deactivate on the keypad

  • The Yale Easy Fit Smartphone Alarm Kit gives you complete control over your home security no matter where you are.

    The Smartphone Alarm is Yale's top of the range home alarm system, and it can be operated using your own iPhone/Android smartphone or via a standard PC web browser.

    When the alarm is triggered, the PIR camera can take an image of the room and send it direct to your phone so you can see instantly what’s caused the alert. If you’re unlucky enough to fall victim to a burglar, you can provide the police with the image and massively improve your chances of getting your belongings back.

    When the alarm is triggered the siren will start sounding and you will be notified by email and push notification (iOS only) on your smartphone.

    You can add up to 20 different sensors (sold separately) to this system, which also comes with a 2-year guarantee for added peace of mind.

    Useful info:

    • Yale Easy Fit Smartphone Alarm Kit
    • Notifies your smartphone when alarm is triggered
    • Sends you a picture of what has triggered alarm
    • 2-year guarantee
    • Expandable up to 20 devices Features
    • For use with iPhone and Android phones
    • Home internet broadband required

    Please note: The smart phone feature requires the use of Yale’s central server. Yale offers no guarantee on the availability of its server. Yale aims to maintain a server until 2018 and will contact individual users via email should the situation change.

    Alarm event is notified by email, push notification event (iOS only) and SMS message. Yale offers 20 Free SMS messages per account, after which additional SMS messages will be chargeable.

  • Protect your valuables and documents with the Yale Budget Safe.

    This robust safe is perfect for your home and lets you store your most precious items like jewellery, keys, cash, passports and personal information, for complete peace of mind.

    It features a simple-to-operate electronic lock which can be programmed with any number combination of your choice of between 3 and 8 numbers.

    For added peace of mind, this Yale Safe also comes with a manual override key so that if you forget your combination you can still get access.

    It comes with fixings so it can be easily mounted to the wall or the floor for total convenience.

    Useful info:

    • Yale Budget Safe
    • Simple to operate electronic lock
    • Can be programmed with any combination of 3 to 8 numbers
    • Includes manual override key
    • Requires 4 x AA batteries (supplied)
    • Can be mounted to the wall or floor
    • Fixings included
    • Model may vary slightly

  • The miGuard RFID tag MGTAG26 is a wirefree Proximity tag that will disarm the miGuard G5 and A11 alarm systems with a simple swipe across the panel. The tag can also disarm the alarms if a MGKP700 RFID Keypad is linked to the alarms. If an electronic door lock is also attached, the tag will unlock the door.

    Useful info:

    • Compatible with the following miGuard alarm systems: A11, G5 and KP700 (Keypad)
    • Disarms the alarm with a swipe across the panel
    • Can also unlock a connected Electronic Door Lock
    • Frequency:125KHz WHAT'S IN THE BOX: RFID Tag

Results: 1 - 12 (of 30)  |  Show all
30 products from £5.00 to £549.00
rated 4.8 out of 5 based on 32 customer reviews.
isNew is true
isReturning is false
isRegistered is false
gender is Unknown
ageTargeting is
isEligibleForBnpl is false
marketingCampaign is
targetedOffersAsString is
accountNumber is